Experience

Equipment

People

Quickest Delivery Times

Highest Levels of Quality

Reduced Label Costs

Art Department

• Pressure-sensitive “L-23”**
  CLEAR, WHITE, and SILVER POLYESTER, 4 mil to 7 mil with screen process or hot stamp printing and clear or matte polyester or velvet polycarbonate lamination overall.
  Use: Indoor on metal and plastic Group I (max temp 100C) and plastic Groups II, III, V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “L-156”**
  WHITE VINYL, 6 mil with screen process or hot stamp printing and clear or matte polyester or velvet polycarbonate lamination overall.
  USE: indoor on metal (max temp 80C) and plastic Groups I, II, III, V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “L-24R”**
  COLOURED VINYL, 6 mil with screen process or hot stamp printing and clear or matte polyester or velvet polycarbonate lamination overall.
  USE: Indoor on metal and plastic Group I (max temp 100C) and plastic Groups II, III, V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “300”**
  CLEAR, WHITE and SILVER POLYESTER, 4 mil with hot stamp printing and clear or matte polyester or velvet polycarbonate lamination overall.
  USE: Indoor on metal (max temp 80C) and plastic Groups I, II, III, IV (except white), V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “300”**
  GOLD (Short Term) POLYESTER, 4 mil with hot stamp printing and clear or matte polyester or velvet polycarbonate lamination overall.
  USE: Indoor on metal (max temp 80C) and plastic Groups I, II, III, IV, V, VI, VII, and VIII (max temp 80C).
• Pressure-sensitive “300”**
  COMPUTER IMPRINTABLE CLEAR, WHITE and SILVER POLYESTER, 3.5 mil to 4.5 mil with hot stamp printing.
  USE: Indoor on metal (max temp 80C) and plastic Groups I, II, III, IV (except white), V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “467MP”**, “468MP”**, “9671”** and “9672”**
  VELVET POLYCARBONATE, 7 mil to 45 mil with (sub-surface) screen process printing.
  USE: Indoor on metal and plastic Group I (max temp 100C) and plastic Group II, III, IV (“9671” and “9672” only ), V, VI, VII and VIII (max temp 80C).

TYPE A – NORMAL USE:

• Pressure-sensitive “L-23”**
  T/C-387 SILVER POLYESTER, 3 mil with hot stamp printing with or without subsequent thermal transfer printing –Ribbons
  1. Iimak SP-330 and SH-36 on all Zebra, Sato and Datamax printers.
  2. Sony TR4070 and NCR/AT&T Promark II on all Zebra, Sato and Datamax printers.
  3. Sony TR4075 on all Sato and Datamax printers.
  USE: Indoor on metal and plastic Group I (max temp 100C) and plastic Groups II, III, V, VI, VII and VIII (max temp 80C).
• Pressure-sensitive “L-23”**
  MT/C-329 WHITE and SILVER POLYESTER, 3 mil with hot stamp printing with or without subsequent thermal transfer printing – Ribbons
  1. Iimak SP-330 on all Zebra, Sato and Datamax printers.
  2. Iimak SH-36 on all Zebra and Sato printers.
  3. Sony TR4085, Advent 102HSI and Ricoh B110A on all Zebra, Sato and Datamax printers.
  4. USE: Indoor on metal and plastic Group I (max temp 100C) and Groups II, III, V, VI, VII and VIII (max temp 80C).
  IDENTIFICATION MARK: Block letters MSI.