Experience Equipment People Quickest Delivery Times Highest Levels of Quality Reduced Label Costs Art Department		Marking and Labeling Systems – Component Pressure-sensitive systems. “MSI 6000”, “MSI 7400”, “MSI 7500”, removable intact. Affixed to aluminum, galvanized steel, alkyd enamel, stainless steel, polyester paint, porcelain, nylon, polycarbonate, glass-filled polycarbonate and phenolic, max temperature 1000 C (212 F), min temperature -40 C (-40 F); acrylic paint, polystyrene, ABS plastic, max temperature 80 C (176F), min temperature 60 C (140F), minimum temperature -40 C (-40 F). suitable where exposed indoos to high humidity or occasional exposure to water. “ MSI 7700”, removable intact. Affixed to aluminum, galvanized steel, stainless steel, acrylic paint, polyester paint, alkyd enamel, glass-filled polycarbonate and phenolic plastic, max temperature 100C (212 F), min temperature -40 C (-40F); polycarbonate and nylon plastic, max temperature 100 C (212 F); acrylonitrile butadiene styrene (ABS), glass filled polyester, polyurethane paint and polystyrene plastic, max temperature 80 C (176 F), min temperature -40 C (-40 F); polypropylene plastic, max temperature 80 C (176 F). suitable where exposed indoors to high humidity or occasional exposure to water. “ MSI 8000”, removable intact. Affixed to stainless steel, galvanized steel, aluminum, alkyd enamel, acrylic paint, polyester paint, epoxy paint, polyester-vinyl paint, porcelain enamel and phenolic plastic, max temperature 100 C (212 F), min temperature -40 C (-40 F); polystyrene and polyphenylene oxide plastic, max temperature 80 C (176 F), min temperature -40 C (-40F); (ABS) plastic, max temperature 60 C (140 F), min temperature -40 C (-40F); polycarbonate and nylon plastic max temperature 100 C (212F); polypropylene plastic, max temperature 80 C (176 F). suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for additional printing with certain ribbon inks. “ MSI 8100”, removable intact. Affixed to stainless steel, galvanized steel, aluminum, alkyd enamel, acrylic paint, polyester paint, epoxy paint, polyester-vinyl paint and porcelain enamel, max temperature 150 C (302F), min temperature -40C (-40F); phenolic plastic, max temperature 100C (212F) min temperature -40 C (-40F); polystyrene and polyphenylene oxide plastic, max temperature 80 C (176F), min temperature -40C (-40F); (ABS) plastic max temperature 60 C (140F); polypropylene plastic max temperature 80 C (176F). suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for additional printing with certain ribbon inks. “ MSI 3000”, “MSI 3000-1”, removable intact. Affixed to water-born acrylic paint and epoxy plastic, max temperature 100 C (212F), min temperature -40 C (-40F); aluminum, galvanized steel, alkyd enamel, ABS plastic and polyphenylene oxide, max temperature 80 C (176 F), min temperature -40 C (-40F); porcelain, polyurethane paint, stainless steel, polycarbonate and glass-filled polycarbonate, max temperature 60 C (140F), min temperature -40 C (-40F); polyethylene terephthalate, max temperature 40 C (104F), min temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water. “ MSI-8800” and “MSI-8900”, removable intact. Affixed to aluminum, galvanized steel, stainless steel, enamel paint, polycarbonate and polyester paint, maximum temperature 100 C (212F); ABS (report Date: 06/14/1990) plastic maximum temperature 80 C (176F). Suitable for use in indoor dry locations only. “ MSI-9000”, removable intact. Affixed to aluminum, ASA terpolymers, galvanized steel, stainless steel, alkyd enamel, acrylic paint, polyester paint, ABS plastic, polyethylene and polypropylene, maximum temperature 80 C (176F). Suitable where exposed indoors to high humidity or occasional exposure to water. “ MSI-9200”, removable intact. Affixed to aluminum, ABS plastic, alkyd paint, epoxy paint, unsaturated (thermoset) polyester, polyphenylene oxide, and nylon, maximum temperature 40 C (104F); polycarbonate, maximum temperature 60 C (140F). Suitable where exposed indoors to high humidity or occasional exposure to water. “ MSI 5000”, removable intact. Affixed to anodized aluminum, aluminum, galvanized steel, urethane polyester paint and alkyd enamel, maximum temperature 150 C (302F), minimum temperature – 40 C (-40F); stainless steel and polyester paint, maximum temperature 150 C (302F), minimum temperature -29 C (-20F); porcelain, maximum temperature 100 C (212F), minimum temperature -40 C (-40F); nylon melamine plastic, polycarbonate and phenolic, maximum temperature 100 C (212F), minimum temperature -29 C (-20F); acrylic paint, ABS plastic and unsaturated (Thermoset) polyester plastic, maximum temperature 80 C (176 F), minimum temperature -40 C (-40F); polystyrene, maximum temperature 80 C (176F), minimum temperature -29 C (-20F); polypropylene, maximum temperature 80 C (176F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for additional printing with the Sony TR4072 thermal transfer ribbon.

Labels and More | Why Choose MSI? | Our Process | FAQs | Tools and Resources | Free Items | Contact MSI Home | About MSI | News | Site Map | Careers 2003 © MSI, Marking Systems, Inc.